Courses
Classroom
- 2018 Canadian Electrical Code
- Addressing Complex Employee Behaviour in the Workplace
June 17-20, 2019 - Halifax, NS
- Auditing of Health & Safety Programs
- Best Operation Practices for a Hydro Electrical Power Plant
- Bid Processing & Effective Contract Management
- Bridge Asset Management
- Bridge Inspection
- Certified Business Analysis Preparation (CBAP)
- Canadian Construction Management Practices
- Commissioning and Start-up Activities of Coal Power Plants
- Commissioning of Electrical Equipment
- Competitive Tendering: Practical & Legal Perspectives
- Concrete Repair and Protection: Getting it Right the Second Time
- Design of Circulating Fluidized Bed Boilers
- Effective Construction Contracting Management Practices
- Effective Grounding and Bonding: Correct Applications for Safe Electrical Installations
- Electrical Engineering for Non-Electrical Engineers
April 29 - May 1, 2019 - Halifax, NS
- Electrical Generators & Excitation Systems
- Enterprise Risk Management Essentials
- Facilitation Skills for Technical Professionals
May 26-27, 2019 - Halifax, NS
- HVAC System: Design, Balancing & Selection
- Indoor Air Quality (part of 4 day course)
- Indoor Air Quality (stand alone course)
- Introduction to Business Analysis
- Marine Renewable Energy: Tidal Power
- Masonry Restoration Projects: Case Studies
- Modern Concrete: Materials and Practices
- NFPA Dust Compliance and Documentation
- National Building Code of Canada
Applications of Part 3 including proposed changes to 2020 NBC
- Negotiation Skills for Engineers
- Occupational Health and Safety Law and Regulations
- Process Mapping for Continual Improvement
- Pumps, Valves, Actuators, Compressors, Motors, and Variable Frequency Drives
April 24-26, 2019 - Halifax, NS - Restoration, Preservation and Rehabilitation of Heritage and Older Masonry Structures
- Risk & Loss Control Management
- Structural Design for Non-Structural Engineers
- Turbocharged Marine Diesel Engines
- Ultra Supercritical Steam Power Plants
- Wood Dust Explosion Prevention/NFPA Dust Compliance & Documentation
May 9-10, 2019 - Richmond, BC
- Wood Construction and NBC Part 9 for Housing and Small Buildings
- Wood Dust Explosion Prevention
Stand-alone online course
Protection and Control: Generator Protection (100% Online)
Open Enrollment (Students have three months from date of registration to complete this online self-directed course)
Online certificate programs
Advanced Process Control Certificate Program
| Module I: Processes, Controllers, and Tuning May 1 - June 26, 2019 |
Module III: Advanced Control Strategies and Optimization October 23 - November 13, 2019 |
| Module II: Loop Performance Assessment and Troubleshooting August 7 - September 11, 2019 |
Module I: Getting Started with AutoCAD 2017, AutoCAD Fundamentals, Basic Object Construction and Dynamic Input |
Module III: Blocks, Attributes & Xrefs, Templates and Plotting, and Introduction to Architectural Drawings |
Module II: Orthographic & Multi-View Drawings, Basic Dimensions & Notes, and Section Views |
|
Chemical Engineering for Non-Chemical Engineers Certificate Program
Module I: Chemical Engineering and Process Plants |
Module III: Unit Operations, Process Units, and Plant Design |
Module II: Process Engineers’ Assets: Concepts, Skills, Deliverables, Codes & Standards |
Module IV: Health, Safety, and Profitability of Process Plants |
Construction Management Certificate Program
Module I: Construction Industry & Practice / Professional Construction Management in Practice |
Module III: Project Closing and Integration and the Importance of Lessons Learned |
Module II: Methods in Project Management |
|
Electrical and Electronic Circuits Certificate Program
Module I: Electrical Fundamentals: Direct Current Circuits |
Module III: Semiconductor Devices and Circuits |
Module II: Alternating Current Circuits |
|
Electrical Engineering for Non-Electrical Engineers Certificate Program
Module I: Electrical Engineering Basics |
Module III: Electrical Power Systems |
Module II: Electrical Equipment |
Module IV: Engineering Design and Implementation |
Energy Engineering and Conservation Certificate Program
Module I: General Fundamentals of Energy Savings |
Module III: Energy Conservation and Saving Engineering |
Module II: Energy Delivering Systems |
|
Ergonomic Program Management Certificate Program
Ergonomics in the Workplace: |
Industrial Ergonomics and Workplace Design |
Office Ergonomics and Workplace Design |
Ergonomic Program Design and Integration |
Heating Ventilation & Air Conditioning (HVAC) Certificate Program
Module I: HVAC Basics |
Module III: Implementing HVAC April 30 - June 11, 2019 April 28 - June 9, 2020 |
Module II: Understanding HVAC |
|
High Voltage Protection & Control Certificate Program
Module I: Basic Protection and Control |
Module III: Advanced Protection and Control Part II August 5 - September 23, 2019 |
Module II: Advanced Protection and Control Part I |
Module IV: Grid Power Systems - Telemetry and Evolution |
Industrial Data Communications Certificate Program
Module I: Basics of Industrial Data Communications |
Module III: Intranetworking & Internetworking |
Module II: Local Area Networking |
|
Maintenance Management Certificate Program
Module I: Introduction to Maintenance Management |
Module III: 3 PM and PdM (Preventive and Predictive Maintenance) |
Module II: Maintenance Planning and Scheduling |
|
Mechanical Engineering for the Non-Mechanical Engineer
| Module I: Mechanical Engineering Basics April 24 - June 12, 2019 |
Module III: Transportation, Building and Rotating Equipment October 30 - December 11, 2019 |
| Module II: Material, Machines, Fuel and Power July 31 - September 11, 2019 |
Module IV: Manufacturing, Environment, Refrigeration, Cryogenics and Optics January 15 - February 26, 2020 |
Process Engineering for Control Practitioners Certificate Program
Module I: Process Industries |
Module III: Safety Devices |
Module II: Process Control |
|
Process Instrumentation and Control Certificate Program
Module I: Sensors & Symbology |
Module III: Installation and Engineering Functions |
Module II: Control Functions |
|
Production Planning & Control Certificate Program
Module I: Planning in a Manufacturing Environment |
Module III: The Management of Supply Chain |
Module II: Capacity and Material Planning |
|
Safety Instrumented System Certificate Program
| Module I: Introduction to SIS September 12 - November 7, 2019 |
Module III: Engineering and Testing April 30 - June 18, 2020 |
| Module II: Design January 9 - March 5, 2020 (No class on January 20, 2020) |
Module IV: Operations and Maintenance August 13 - October 1, 2020 |
Technical Writing Certificate Program
Technical Writing Essentials |
Grammar Tune-up |
Persuasive Writing |
Writing Clear Technical Reports |
Writing Emails that Get Results |
Project Management Documents |